Heat pump hot water cost and running costs in Australia (2026)

Key takeaways

  • A quality heat pump hot water system for an average household costs about $3,800 to $5,200 installed, and the federal STC discount takes roughly $1,000 off, leaving about $2,800 to $4,200.
  • In our worked example a heat pump replacing electric storage hot water saves about $875 a year in running costs.
  • Ask for a heat loss or load calculation before you accept any quote.

A heat pump moves heat instead of burning fuel, so it can deliver several units of heat for each unit of electricity. That makes it very efficient, but whether it saves money depends on how expensive electricity is compared with the fuel you use now.

What does it cost in Australia?

A quality heat pump hot water system for an average household costs about $3,800 to $5,200 installed, and the federal STC discount takes roughly $1,000 off, leaving about $2,800 to $4,200. The default cost below is after the STC discount.

  • Heat pump hot water can use 60% to 75% less electricity than a standard electric storage system
  • Reverse-cycle air conditioners are the usual heating upgrade; state programs can add rebates, for example in Victoria and the ACT

A worked example

Using the defaults in our heat pump calculator, with electric storage hot water as the current heating:

ItemExample
Current heating use3,500 kWh of fuel a year
Current running cost$1,225
Heat pump running cost (efficiency 3.5)$350
Yearly saving$875
Installed cost after grants$3,500
Payback4.0 years

Payback is the cost after grants divided by the yearly saving. Better insulation and a heat-pump tariff can improve it. Always run your own numbers: the result is very sensitive to your fuel price, your electricity price and the system's real-world efficiency.

Want prices for your own home?

Tell us about your home once and we will pass your request to up to three installers. It is free.

Get free quotes

What makes a good installation

  • A room-by-room heat loss calculation, not a rule of thumb.
  • Radiators, pipework or ductwork checked for suitability.
  • The outdoor unit positioned for airflow and acceptable noise.
  • Controls set up and explained, with a plan for hot water.
  • Written details of any grant or rebate, and who applies for it.

Local things to know in Australia

For most Australian homes the best first step is a heat pump hot water system, which can use 60% to 75% less electricity than a standard electric storage heater. The federal STC discount takes roughly $1,000 off, and state programs can add more, such as the Victorian hot water rebate of up to $1,400.

For heating and cooling, a reverse-cycle air conditioner is the usual upgrade. The Victorian Energy Upgrades program has subsidised these, and the ACT Sustainable Household Scheme offers 3% loans. Ask whether replacing gas appliances changes your fixed charges.

FAQ

Do heat pumps work in cold weather?

Yes. Modern air source heat pumps keep working at low temperatures, but efficiency falls as it gets colder. In very cold climates choose a model designed for them and ask the installer for its rated output at your typical winter temperature.

Will a heat pump lower my bills?

It depends on what you replace. They tend to save most against oil, LPG or electric resistance heating, and least against cheap mains gas. Use the calculator with your own bills.

How long does installation take?

A typical home takes from one to a few days, plus time for the survey and any grant paperwork.

Sources

General information, not financial, tax or legal advice. Prices and schemes change; confirm with official sources. See our methodology.

Keep reading

Get free quotes

Get free quotes