Home EV charger installation cost in Australia (2026)
Key takeaways
- Most Australian homeowners pay about $1,200 to $2,300 for a standard 7 kW single-phase charger fully installed.
- In our worked example, charging at home costs about $865 a year against $2,282 for petrol.
- The biggest cost surprises are panel or fuse-board upgrades and long cable runs, so ask the installer to survey before quoting.
A dedicated home charger is much faster and more convenient than a standard socket, and charging overnight is usually the cheapest way to run an electric car. The installation must be done by a qualified electrician who checks that your electrical supply can handle it safely.
What does it cost in Australia?
Most Australian homeowners pay about $1,200 to $2,300 for a standard 7 kW single-phase charger fully installed. There is no broad federal rebate; some states and territories have schemes.
- Charging from rooftop solar or a cheap overnight rate lowers running costs a lot
- Some states and territories, such as the ACT, have offered grants toward home chargers
A worked example
Using the defaults in our EV charger calculator:
| Item | Example |
|---|---|
| Distance driven | 13,000 km a year |
| Home charging cost | $865 a year |
| Petrol cost for the same distance | $2,282 a year |
| Yearly saving from driving electric | $1,417 |
| Charger cost after grants | $1,700 |
The saving comes mainly from driving an electric car, not from the charger itself, so treat the charger payback as a rough upper bound on the benefit. Petrol prices are approximate, so use your own.
Want prices for your own home?
Tell us about your home once and we will pass your request to up to three installers. It is free.
What drives the price up
- Distance between the charger and your switchboard or panel.
- A switchboard, panel or incoming supply that needs upgrading.
- Trenching or drilling through walls and floors.
- Smart features, solar integration and load balancing.
- Whether the cable is tethered or you supply your own.
Local things to know in Australia
Most Australian homeowners pay about $1,200 to $2,300 for a standard 7 kW single-phase charger fully installed. There is no broad federal rebate, though some states and territories, such as the ACT, have offered grants.
Charging from rooftop solar or a cheap overnight rate lowers running costs a lot. Use a licensed electrician, ask them to check your switchboard capacity and consider whether a solar-aware smart charger suits your setup.
FAQ
Do I need a home charger?
Not always. If you drive short distances and can charge for long periods on a standard socket, you may manage without one. A dedicated charger is faster, safer for regular use and often needed to use smart tariffs.
How fast is a home charger?
A typical 7 kW home charger adds roughly 20 to 30 miles (35 to 50 km) of range per hour, enough for most cars to fill overnight. Your car's onboard charger may limit the speed.
Can I charge from my solar panels?
Yes. Some chargers can prioritise surplus solar, which lowers running costs. Ask for this feature if you have or plan to add solar.
Sources
General information, not financial, tax or legal advice. Prices and schemes change; confirm with official sources. See our methodology.
Keep reading
Choosing an installer
How to compare installer quotes and choose a good installer in Australia
A checklist for comparing solar, battery, heat pump and EV charger quotes in Australia: what to ask, what to check and what warning signs to look for.
2 min read · Updated 2026-11-19
Planning your upgrades
What order should you electrify your home in Australia? A practical plan
A practical order for upgrading to solar, a battery, a heat pump and an EV charger in Australia, so each step makes the next one cheaper or better.
2 min read · Updated 2026-11-19